A HAST Accelerated Aging Test Chamber (Highly Accelerated Stress Test Chamber) is a laboratory device used to simulate an accelerated aging environment. It is mainly used to evaluate the performance and durability of electronic components, semiconductor chips, and other materials under high-temperature, high-humidity, and high-pressure conditions.
The principles are as follows:
High Temperature: The HAST test chamber accelerates the aging process of materials by setting a high temperature (usually 130℃). High temperature can speed up chemical reactions and physical changes, simulating the aging of products over a long period of use.
High Humidity: The relative humidity inside the test chamber is usually set at around 85%. This high humidity condition can accelerate the penetration of moisture through external protective materials or the seal packaging around chip leads, thereby assessing the moisture resistance of products in high-temperature and high-humidity environments.
High Pressure: The HAST test chamber increases atmospheric pressure within a controlled pressure vessel, which can typically reach 3 atm or higher, to achieve temperature and humidity control above 100℃. The increase in pressure can accelerate the aging effects of temperature and humidity on materials, such as material migration, corrosion, and insulation degradation.
Bias Voltage (bHAST): In some HAST tests, in addition to high-temperature, high-humidity, and high-pressure conditions, bias voltage can also be applied to samples. This simulates the electrical stress that may be encountered in actual use, to assess the durability of electronic components under electrical stress.
Non-saturated Steam Testing: The HAST test chamber usually refers to non-saturated steam testing with a relative humidity of 85%, which is different from the PCT test chamber (usually referring to saturated steam testing with 100% relative humidity). The HAST test chamber completes the test by setting and creating various conditions of temperature, humidity, and pressure within a highly controlled pressure vessel.
The HAST Accelerated Aging Test Chamber is widely used in the accelerated aging life tests of products in industries such as IC semiconductors, connectors, printed circuit boards, magnetic materials, high molecular materials, EVA, and photovoltaic modules.
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Air-exchange Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Ti?ng Vi?t
???????
???????? ????
