亚洲欧美电影一区二区_麻豆国产一区二区_免费高清在线一区_久久免费高清视频

Search for the product you are looking for
Military Standard Rain Test Chamber

Military Standard Rain Test Chamber

Product Introduction
Military standard rain test chamber used for military equipment or electronic products in a variety of intensity rain environment simulation of dynamic operation, military equipment rain test method and the main parameters, in a test box can be realized in the wind source of rain test, drip test. Determine the military equipment or electronic products in the rain conditions, the ability of its shell seals to prevent rainwater infiltration and by the rain or after the work of the performance, to assess the waterproof quality of the product.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size? (D*W*H)mm Dimension(D*W*H)mm
LRHS-1320-PL 1600mm×2500mm×3300 約2500mm×5100mm×3563
temperature range Water temperature +10°C
quantity of rainfall 10—15cm/h
raindrop diameter 0.5—4.5mm
Test wind speed Horizontal wind speed 10-18m/s adjustable
raindrop angle The raindrops have a horizontal direction to 45 ° angle change, and uniformly flutter on the side of the test piece
Intensive rainfall This procedure may be considered when testing large specimens where rainfall and rain blowing devices cannot be used.
quantity of rainfall 2800+30L/m2/h
Rain drops cannot be aggregated into a stream, and the dispenser distributes the drip holes in a matrix at 20-25.4mm intervals.
Rainfall distance The drip height should ensure that the final velocity of the water drop is 9m/s
Turntable size/carrying capacity Diameter: φ1000mm, Load: ≥50kg
Speed range 1~5r/min continuously adjustable
Workpiece size limitation Maximum allowable size of test piece: 1000mm×1000mm×1000mm
Outer case material High-quality library boards
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam
drip tray Imported high-grade stainless steel SUS304 + aluminum plywood + aluminum profile
Controller Taiwan “Wyland” temperature and humidity controller (7.0 inches, high-definition true color “TFT” LCD touch screen)
Heating systems Nichrome wire heaters
temperature sensor High Accuracy Pt100 Platinum Resistance Temperature Sensors
Wind Speed Sensor Differential pressure air velocity sensor, 4-20mA output
security protection Fan, motor, pump overcurrent overload protection, limit, undervoltage, short circuit, phase loss, over temperature, leakage protection
Supply Voltage AC380V±10% 50Hz
Supply Voltage AC380V±10% 50Hz
Power 24.5kW

 

Product Recommendation
Industry News
A salt spray test chamber is an accelerated corrosion environmental testing device. The primary causes of metal corrosion include oxygen, salt particles, pollutants in the air, as well as changes in temperature and humidity.
The high and low temperature test chamber is a large, high-precision testing instrument.
In fact, waterproof testing in rain test chambers is divided into nine distinct levels. Below are the specifics of these nine levels
Telegram WhatsApp Facebook VK LinkedIn
主站蜘蛛池模板: 沅陵县| 茶陵县| 交口县| 会东县| 乐至县| 临武县| 宁德市| 北宁市| 建瓯市| 成武县| 颍上县| 常山县| 云林县| 丰都县| 和顺县| 东港市| 商河县| 金昌市| 平和县| 隆回县| 通渭县| 甘孜| 香河县| 辽宁省| 河池市| 洛浦县| 芮城县| 长泰县| 政和县| 沛县| 乐山市| 双流县| 河南省| 灯塔市| 从江县| 吴川市| 东丰县| 竹北市| 马山县| 如东县| 仁布县|