色综合久久久久久久,成人黄色影片在线,欧美一区综合

Product Parameter

Model

LRHS-6500-LHF

temperature range	A：-20℃~150℃? B：-40℃~150℃? C：-60℃~150℃ D：-70℃~150℃
Temperature uniformity	≤2℃(at no load)
Temperature fluctuation	≤±0.5℃(at no load)
Humidity range	20%～98% RH
Humidity uniformity	±2.5% RH
Humidity fluctuations	±2%
heating rate	1.0～3.0℃/min
cooling rate	0.7～1.0℃/min
Time Setting Range	1～60000M
test hole	Mounted on the left side of the machine for use with external test power or signal cables
viewing window	210 x 275mm or 395 x 395mm (effective field of view)
Outer case material	High quality A3 steel plate electrostatic spraying
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature and humidity meter
temperature sensor	PT100 platinum resistance temperature measurement body
refrigeration system	cascade cooling
Compressor	France Tecumseh / BITZER, Germany
standard configuration		1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box
security protection		Pressure release device, anti-spark design, smoke alarm, intake and exhaust devices, Spraying fire extinguishing device, compressor overpressure overload, fan motor overheating, the whole machine under-phase/reverse-phase Over-temperature, overall equipment timing, leakage protection, overload and short-circuit protection.
Supply Voltage		AC380V±10% 50Hz
Power		4.0kW/5.5kW/8.5kW/11.5kW/11.5kW
operating environment		5℃～＋28℃ ≤85% RH

Industry News

If the low-temperature test chamber is leaking, what should we do?

The sealing of the low-temperature test chamber is crucial. If the sealing of the equipment is compromised, air leakage may affect the test results, so timely action is required. Here’s what you can do

The “Forbidden List” of Thermal Shock Test Chambers: Which Materials Cannot Be Tested?

The thermal shock test chamber is truly a versatile tool in the field of material testing. It can simulate extreme environments where materials experience rapid alternations between extremely high and low temperatures within a short period.

What are the installation requirements for a sand and dust test chamber?

A sand and dust test chamber is a testing device used to inspect the sealing performance of products. However, if the equipment is not installed correctly before use, various issues may arise during its operation, leading to inaccuracies in the test results.

亚洲欧美电影一区二区_麻豆国产一区二区_免费高清在线一区_久久免费高清视频

Battery Test Chamber