What exactly are the reasons for the alarms in a high-low temperature test chamber? Does it necessarily mean that there is a malfunction in the equipment? Today, the editor from Linpin Instrument will guide you through the following methods to troubleshoot the specific causes.
Alarms may occur in the centrifugal fan section of the high-low temperature test chamber, typically triggered by overtemperature or overcurrent conditions. If the temperature of the centrifugal fan’s magnetic coil rises excessively, the equipment will automatically shut down and send out an alarm. Similarly, when the current of the centrifugal fan exceeds the control set value, an alarm will be triggered, causing the equipment to shut down.
If alarms occur in the temperature system of the high-low temperature test chamber, it may be due to overtemperature protection of the test specimen or overheating alarms inside the chamber. When the temperature in the test specimen area exceeds the protection temperature set on the control panel, the equipment will shut down and send out an alarm. The overheating alarm inside the chamber is caused by the presence of overtemperature protectors in the test specimen area controller, the safety channel, and on the control panel. When the temperature in the test area exceeds the temperature set on the control panel, the equipment will shut down and send out an alarm.
Additionally, the refrigeration unit of the high-low temperature test chamber may also send out alarms. Once the temperature of the refrigeration compressor’s magnetic coil rises excessively or there is an abnormality in the power supply system, the equipment will shut down due to overtemperature and send out an alarm. If the refrigerant pressure of the refrigeration unit exceeds the preset value, an overpressure alarm will be triggered, causing the equipment to shut down. When there is insufficient cooling circulating water in the circulation system, the pressure of the circulating water system will drop, and the equipment will shut down and send out an alarm at this time. There are also alarms for phase loss and phase sequence issues: when there is a phase loss or a change in the phase sequence of the external power supply to the equipment, it will also shut down and send out an alarm.
All these situations may lead to alarms in the high-low temperature test chamber. After the equipment sends out an alarm, the cause should be promptly investigated and addressed before the equipment can be restarted. If the alarm persists after troubleshooting and handling, it is necessary to contact the manufacturer’s after-sales service personnel for further handling. As a manufacturer of test chambers, Linpin Instrument can provide technical support services for test chambers. Welcome to call 400-066-2888 for technical inquiries.
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Air-exchange Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Ti?ng Vi?t
???????
???????? ????
