色综合综合网,国产精品高精视频免费,在线观看日韩视频

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-108-RFHY	450×600×400	Subject to contractual three-view
LRHS-270-RFHY	600×900×500
LRHS-412-RFHY	750×1100×500
LRHS-663-RFHY	850×1300×600
LRHS-816-RFHY	850×1300×600
LRHS-1080-RFHY	900×2000×600

temperature range	RT+5℃～60℃
Humidity range	30%～98% RH
Saturated drum temperature	RT+10℃～70℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃ (at no load)
Salt spray deposition	1～2ml/80 cm2.h(16-hour average)
heating rate	0.5℃～1.5℃/min
cooling rate	0.5℃～1.0℃/min
Compressed air pressure	2.00±0.01（kg/cm2）
Spraying method	Continuous/periodic selectable
Specimen holder angle	20±5°
Test Methods	NSS test AASS test CASS test
Case Material	PP reinforced rigid plastic sheet or 316 stainless steel
Lid Material	PP reinforced rigid plastic sheet or 316 stainless steel
Air-saturated drums	Imported high-grade stainless steel SUS304
Pressurized Air Hose Material	High quality rubber hose
Other pipelines	Thickened Fluorosilicone Rubber Tubing
Temperature Controller	Imported “UEC” brand temperature and humidity meter
Dehumidification and cooling	Single or double cascade refrigeration
temperature sensor	PT100 platinum resistance temperature measurement body
Compressor	Taikang, France
heater	Titanium Heating Tube
interrupter	Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration		V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes
security protection		Over-temperature, overall equipment under-phase/reverse-phase, test timing, rapid fogging instructions The end of the test, low water level protection, leakage, short circuit, compressor overpressure overload
Supply Voltage		AC380V±10% 50Hz
Power consumption		8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard salt spray box for automotive parts etc 3、This technical information, subject to change without notice

Industry News

What are the methods for determining the results of a salt spray test chamber?

A salt spray test chamber is a device used to evaluate the corrosion resistance of product surfaces, widely applied in material research across various industries and academic institutions.

n-Depth Analysis of Thermal Shock Chamber Product Features —With a Discussion on Structural Differences Compared with Conventional Climatic Test Equipment

Although both thermal-shock and steady-state temperature/humidity tests fall under the umbrella of “weathering verification”, they differ fundamentally in physical modelling, control logic and safety strategy.

Discussion: Future Trends in the Temperature & Humidity Cycling Test Chamber Industry

With rapid economic growth and continuous technological advancements, the scientific and technological sophistication of temperature & humidity cycling test chambers has been steadily increasing.

亚洲欧美电影一区二区_麻豆国产一区二区_免费高清在线一区_久久免费高清视频

Salt spray box for automotive parts