日韩中文字幕亚洲一区二区va在线,一区二区三区在线高清,日韩欧美国产一区二区三区

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-672-NGF	700×800×1200	1030×1580×2150

light source drive	EPS
Effective irradiance area	800mm×700mm
Distance of light source from test surface	1000±200mm
Light source power	2000W/lamp
Number of light sources	1PCS
Light intensity range	150～250W/m2
spectral range	280～320nm 320～400nm
UVB/(UVA+UVB)	5 to 8%
inhomogeneity	≤10%
UVC Content	（Ratio of integrated irradiance in the wavelength range (250-280) nm to integrated irradiance in the wavelength range (250-400) nm of UVC content ≤1%.
Sample temperature range	60～70℃ (customized water-cooled structure for cell carrier table)
Sample temperature deviation	≤±2℃
Chamber temperature range	20～80℃
Box temperature fluctuation	≤1℃
Outer case material	1.2mm Cold rolled steel plate with plastic spraying on both sides
Inner box material	1.0mm thick SUS304 stainless steel, sunlight simulating fully reflective reflective film mounted on the side wall for secondary sealing and optical reflection control.
Insulation material	10mm Thickness High Quality Insulation Material
Controller	Siemens PLC Module + Touch Screen
Cooling method	Air-cooled refrigeration
Compressor	Taikang, France
Heating method	Nickel-chromium alloy electric wire type heater
light source	Holler lamp, metal halide wick, European brand. Warranty time of the light source 2000 hours, the actual use of time greater than or equal to 3000 hours
irradiance meter	Alberdi Brands
security protection	Emergency stop button, sample surface temperature is too high, light source system fault alarm, power supply phase/undervoltage/overvoltage/leakage protection, fan overload, compressor overvoltage/overheat/overcurrent, heating wire over-temperature protection
Supply Voltage	Voltage: 3/N/PE AC 400V±10% 50Hz Rated current: 30A
Power	20.0kW
operating environment	10℃～＋35℃ ? ?? ≤75% RH
Note: 1、 the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions 2、Can be customized according to the specific requirements of the user non-standard uv aging simulation test chamber etc 3、This technical information is subject to change without prior notice.

Industry News

Warning: These Factors Can Affect UV Aging Test Chambers

Certain factors can impact the effectiveness of UV aging test chambers. Therefore, it is essential to remain vigilant and pay close attention to these factors during equipment operation. By continuously monitoring and improving these aspects, the efficiency of the equipment can be enhanced. Below, we examine these influencing factors.

The Cleaning and Maintenance Secrets of Constant Temperature and Humidity Test Chambers: Have You Mastered Them?

In many production workshops of enterprises, constant temperature and humidity test chambers are often indispensable pieces of equipment. However, many operators tend to overlook the daily cleaning of these devices during use, leading to a rapid accumulation of grease and dust on the equipment.

Have You Learned the Cleaning Tips for the Constant Temperature and Humidity Test Chamber?

In the workshops of some enterprises, we often see a brand-new constant temperature and humidity test chamber that, after a short period of use, becomes covered in oil stains and dust.

亚洲欧美电影一区二区_麻豆国产一区二区_免费高清在线一区_久久免费高清视频

UV Aging Simulation Test Chamber