91一区在线,欧美啪啪网站,国产精品一区二区三区成人

Product Parameter

Model		Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-2X1000C-LH		Room A: 1000×1000×1000 Room B: 1000×1000×1000	Approx. 2400 x 2900 x 2150

temperature range	-60℃～180℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Time setting range	1～60000M
Humidity range	20%～98% RH
Humidity uniformity	+2% -3% RH
Humidity fluctuations	±2%
Heating rate	2.0～3.0℃/min
cooling rate	1.0～2.0℃/min
?test hole	Mounted on the left/right side of the machine at ?80mm for use with external test power cables or signal cables.
Observation window	395×395mm(Effective vision)
Outer box material	High quality A3 steel plate electrostatic spraying
?Inner box material	High quality stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature and humidity controller	Japan “UEC” temperature and humidity meter
Temperature and humidity sensors	Electronic sensors
Cooling method	Two-machine cascade refrigeration
compactors	BITZER Compressors
standard configuration		1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box
security protection		Compressor overpressure overload, over temperature, fan motor overheating, leakage protection Overload and short-circuit protection for the whole machine, under-phase/reverse-phase, timing of the whole equipment, overload and short-circuit protection.
Supply Voltage		AC380V±10% 50Hz
Power		25.5kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard AB constant temperature and humidity box etc 3、This technical information, subject to change without notice

Industry News

Don’t Underestimate the Cleaning of High and Low-Temperature Test Chambers

Some may consider the cleaning of high and low-temperature test chambers a minor issue and not take it seriously. However, proper cleaning can improve equipment efficiency, reduce failure rates, and lower operational costs. This article emphasizes the importance of this task and provides a brief guide on cleaning procedures.

Purchasing a Rain Test Chamber is Easy, but Maintenance is Not—Use it with Care

There are many manufacturers of rain test chamber equipment on the market, and customers can choose the appropriate equipment based on their testing needs.

Safety Precautions for Using High and Low Temperature Shock Test Chambers

Safety always serves as the cornerstone of equipment operation, and for specialized equipment like high and low temperature shock test chambers, safety considerations are of utmost importance. Below, we will elaborate on the key safety points that require special attention during the use of high and low temperature shock test chambers.

亚洲欧美电影一区二区_麻豆国产一区二区_免费高清在线一区_久久免费高清视频

AB Constant Temperature and Humidity Box