亚洲三级在线观看,欧美wwwxxxx,国产传媒一区二区

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-108-RFHY	450×600×400	Subject to contractual three-view
LRHS-270-RFHY	600×900×500	Subject to contractual three-view
LRHS-412-RFHY	750×1100×500	Subject to contractual three-view
LRHS-663-RFHY	850×1300×600	Subject to contractual three-view
LRHS-816-RFHY	850×1600×600	Subject to contractual three-view
LRHS-1080-RFHY	900×2000×600	Subject to contractual three-view

temperature range	RT+5℃～80℃
Humidity range	30%～98% RH
Saturated drum temperature	RT+10℃～70℃
Temperature uniformity	≤2℃
Temperature fluctuation	±0.5℃
Salt spray deposition	1～2ml/80 cm2.h(16-hour average)
Compressed air pressure	2.00±0.01（kg/cm2）
Spraying method	Continuous/periodic selectable
Specimen holder angle	20±5°
Test Methods	NSS test AASS test CASS test
Case Material	Fiberglass reinforced plastic (FRP)
Lid Material	Fiberglass reinforced plastic (FRP)
Air-saturated drums	High quality premium stainless steel SUS304
Pressurized Air Hose Material	High quality rubber hose
Other pipelines	Thickened Fluorosilicone Rubber Tubing
Temperature Controller	High-quality “UEC” brand temperature and humidity meter
Dehumidification and cooling	Single or double cascade refrigeration
Compressor	Taikang, France
temperature sensor	PT100 platinum resistance temperature measurement body
heater	Titanium Heating Tube
interrupter	Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration		V-shaped sample holder, round rod, nozzle, funnel, measuring cylinder, mist exhaust pipe
security protection		Phase loss/reverse phase for the entire machine, equipment timing, rapid mist exhaust indicator, test completion Over-temperature, low water level protection, leakage current, short circuit, compressor overpressure overload
Supply Voltage		AC380V±10% 50Hz
Power		8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
Temperature:	5℃～＋35℃（(Average temperature over 24 hours ≤ 28°C)
Relative Humidity:	≤85%RH
Note: 1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the user’s specific requirements, such as non-standard test chamber 3、This technical information, if there is any change without prior notice

Industry News

List of Precautions to Note During the Use of a Rain Test Chamber

To ensure relatively accurate test results from a rain test chamber, there are several key points to pay attention to. Below, we outline these precautions for your reference.

Sudden Drop in Dust Test Chamber Efficiency: The Triple Gate of Technology, Management, and Asset ——A Systematic Diagnostic Report for Laboratory Managers and Equipment Engineers

During the past twelve months, several third-party testing bodies and OEM laboratories reported the same problem: when running dust tests in accordance with GB/T 4208, IEC 60529 or MIL-STD-810, the batch cycle has stretched from 48 h to 72 h, even 96 h, while energy consumption has risen by more than 30 %.

Analysis of the Application of Sand and Dust Test Chambers in the Military Industry

The sand and dust test chamber is used to evaluate the dust resistance of objects in sandy and dusty environments. Currently, this equipment is widely applied across various fields. Today, we will focus on its application in the military industry.

亚洲欧美电影一区二区_麻豆国产一区二区_免费高清在线一区_久久免费高清视频

Fiberglass composite salt spray test chamber